INNOX3D
INNOX3D DIY 5.5 Gal tank conversion kit- Removable mesh air vents and plexiglass door.
INNOX3D DIY 5.5 Gal tank conversion kit- Removable mesh air vents and plexiglass door.
Couldn't load pickup availability
Innox3D DIY 5.5 gal vertical terrarium conversion kit. (3D printed)
Introducing the Integrated Magnetic Micro-Mesh Screen: Designed to keep your smallest critters safe, secure, and stylish. Whether you're housing cresties, day geckos, dart frogs, mantises, jumping spiders, or other delicate inhabitants, this ultra-fine mesh keeps them in—and unwanted pests out.
Specifically made for Aqueon 5.5 gallon tanks
Will fit most standard framed aquariums (16.25×8.5×10.5)
*width is important, make sure your tanks frames width is 8.5in OD & 7.75in ID*
Pieces include:
Top vent (x1)
Bottom vent (x1)
Magnetic mesh screen (x2)
Door frame + 3 mm plexiglass pre-assembled (x1)
Hinge Pins (x1)
Locking Pins x(2)
**Will not work with a rimless tank**
---
🛠️ Aquarium Vent Installation Guide
Materials Needed:
- Aquarium-safe silicone or non-toxic sealant
---
Step 1: Install Top Vent Piece
- Apply a continuous bead of adhesive along the top rim of the tank.
- Carefully place the top vent piece onto the adhesive, pressing it firmly into position.
Step 2: Install Bottom Vent Piece
- Repeat the same process on the bottom rim of the tank.
- Ensure both top and bottom vent pieces are securely attached and aligned.
Step 3: Attach the Door
- Angle the door so the hinge aligns with the bottom vent pin.
- Gently pop the door into the space between the top and bottom vent pieces. Install the top hinge pin.
Step 4: Curing Time
- Allow the adhesive to air out and cure for 24–48 hours.
- Before introducing any animals, confirm that there are no lingering adhesive odors inside the tank to ensure a safe environment.
---
