INNOX3D DIY 30 Gal tank conversion kit

Innox3D DIY 30 gal vertical terrarium conversion kit. (3D printed)

Specifically 30 long gallon tanks
Will fit most standard framed aquariums (35.5 l × 12 w)

*ID dimensiong on the tank ate important, make sure your tanks frames width is 11.5" ID, tank frame length 35.25"*

Pieces include:
Top vent (x1)
Bottom vent (x1)
Door frame + 3 mm plexiglass pre-assembled (x1)
Hinges (x3)
Locking latches x(2)

The viewing windows is 16 x 8.

Perfect kit to create a arboreal terrarium for tree frogs, gargoyle geckos, crested geckos, day geckos, and much more.

**Will not work with a rimless tank**
*Installation will require either silicone or a sealant of your choice.
Sealant will need to be applied on the inner tank lip.
install each piece of the kit onto the inner tank lip.
Let kit with sealand dry forn24hr to allow for proper bond.