INNOX3D DIY 10 Gal tank conversion kit - Plexiglass and Mesh Version

Innox3D DIY 10 gal vertical terrarium conversion kit-Plexiglass Door with Mesh version frame. (3D printed)

Specifically made for Marineland 10 gallon tanks
*Verify your tanks frames is 19.5in ID & 9.5in ID

1.25mm x 1.25mm mesh size x 3mm thick.

This mesh will keep tiny feeders, like melangascar fruit flies and bean beetles from escaping the enclosure.

Pieces include:
Top vent (x1)
Bottom vent (x1)
Door frame
Hinge Pins (x1)
Locking Pins x(2)
Hydrometer with display of humidity and temperature

Perfect kit to create a arboreal terrarium for tree frogs, gargoyle geckos, crested geckos, day geckos, and much more.

**Will not work with a rimless tank**

---

🛠️ Aquarium Vent Installation Guide

Materials Needed:
- Aquarium-safe silicone or non-toxic sealant

---

Step 1: Install Top Vent Piece
- Apply a continuous bead of adhesive along the top rim of the tank.
- Carefully place the top vent piece onto the adhesive, pressing it firmly into position.

Step 2: Install Bottom Vent Piece
- Repeat the same process on the bottom rim of the tank.
- Ensure both top and bottom vent pieces are securely attached and aligned.

Step 3: Attach the Door
- Angle the door so the hinge aligns with the bottom vent pin.
- Gently pop the door into the space between the top and bottom vent pieces. Install the top hinge pin.

Step 4: Curing Time
- Allow the adhesive to air out and cure for 24–48 hours.
- Before introducing any animals, confirm that there are no lingering adhesive odors inside the tank to ensure a safe environment.

---